Other

The Greenfield KS5 is a center-mounted kickstand. The kickstand is constructed from aluminum and made in the USA. - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Includes extra long bolt - Kickstand can be cut to a specific length - For bikes without factory mounting plate (includes top plate and bolt)

- Add to older versions of the SuperStand to extend height to accept 29er wheels

- Designed to fit most lightweight, midweight, and cruiser bicycles - Fits frames with welded-on mounting plates - Made in the U.S.A.

Surly made these handy plates for use with either the Long Haul or Disc Trucker frames, and only the Long Haul and Disc Trucker frames. They are to be used with a bicycle kickstand to keep your bicycle upright while not moving as if by magic. The plates consist of two halves that, when clamped on your frame in conjunction with a kickstand, protect your chainstays from hamfisting by sandwiching the frame between the plates. Have you ever eaten a hamfist sandwich? They taste terrible, so avoid them like the plague. - Compatible with 2019 and older Long Haul and Disc Trucker frames

Show Surly pride and add some flare with these stickers. Slap one on your helmet, bike, or whatever you choose.

Surly Big Dummy Frame Stickers/Decals - For repair, repaint or whatever - Dry transfer style - Headbadge included

For repair, repaint, or whatever - Dry transfer style - Headbadge included

Surly Krampus Frame Stickers/Decals - For repair, repaint, or whatever - Dry transfer style - Headbadge included

Surly Krampus Frame Stickers/Decals - For repair, repaint, or whatever - Dry transfer style - Headbadge included

Surly Wednesday Frame Stickers/Decals - For repair, repaint, or whatever - Dry transfer style - Headbadge included

Surly Wednesday Frame Stickers/Decals - For repair, repaint, or whatever - Dry transfer style - Headbadge included

- Adjustable direct rear mount kickstand - Mounts to 18-40mm kickstand tab - Fully adjustable length for 26" to 29" wheels - Self locking design - Alloy construction

Nylon beaded cable ties - 8-inch - Reusable

Nylon cable ties - 8 inches long

Sunlite's Polo Seat Rail is the right part for mounting Sunlite's Polo Saddles on your favorite bike (Sunlite's Polo Saddles are sold separately and also sometimes called "banana seats"). To install, the seat's clamp fits onto the seatpost and the Seat Rail attaches to the rear wheel axle and the back of the Polo Saddle to support it. The Seat Rail has several mounting positions for getting your saddle in the most comfortable position. This sturdy-steel strut (also called a "sissy bar") boasts a beautiful polished-chrome finish to match your rig's smooth style. The 36-inch model has a built-in backrest that extends above the seat.

• Forged aluminum construction • Center mount design

- Highly reflective sticker sheets that contain a variety of different shapes and sizes of stickers - Perfect for frames, helmets, pads, or anywhere you want to add a bit more visibility

This pair of Sunlite M5x20 bolts with 6mm spacers is perfect for when components and accessories interfere with each other and additional space is needed. - Makes room for derailleurs, fenders, racks and more - Size: M5 x 20mm w/6mm spacer

Eyebolt and Nut Set for mounting V-Stays to the Bluemels Fenders. Contains 8 stainless eyebolts, 8 stainless nuts and 8 plastic stay endcaps. The set is available in either black or silver finish. This hardware set is included with the fenders, this kit is available as a replacement. - Made in Germany - 11890 Nuts and bolts are black finish - 11891 Nuts and bolts are silver finish

This eyebolt and nut set for fender-mounting contains 8 stainless eyebolts, 8 stainless nuts, and 8 plastic stay endcaps. This hardware set is used for mounting Chromoplastic Longboards, Bluemels, and Commuter II Fenders.

Sip your morning coffee out of this Q-branded ceramic mug. - Volume: 12 oz

Converts quill style forks to use threadless stems.

Designed for bartenders, homebrewers, and the kind folks who pour our delicious cold-brew coffee, the Problem Solvers Pedal to Tap Handle Adapter allows thirsty cycling enthusiasts to top their favorite tap handle with the bicycle pedal of their choice. - Works with standard 3/8" tap handles and 9/16" pedal spindles - Two configurations, both labeled with "L" or "R", for compatibility with left and right-hand-threaded pedals - Aluminum construction - 20 TPI

Vinyl adhesive decal, perfect for tool boards, vehicles and trailers. Available in black or white. Dimensions: 36 x 4.5-inches

Made of aluminum and embossed with the “Bicycle Tools” label. Dimensions: 26.5 x 6.5-inches

- Three-color, brushed aluminum Park Tool logo sign measures 21" x 11-1/2" and has holes for hanging

- Easy to apply: Simply peel off and install - Ultra-Tough Cube-Tec protection shields against scratches, scuffs, stone chips and damage to your cranks - Durable, weatherproof 3M adhesive - 2-piece pack is designed to fit most cranks

Have peace of mind for bigger loads with the 3-band heavy duty universal PakYak Cargo Strap; use it to secure oversized items on the PakYak E+ cargo bike. - Elastic for versatile usage

- EverClear Roll is 12 micrometers (µm) thick and offers 2 x 60-inches of high-quality protection film - It's designed to protect your frame against anything from rock chips to cable rubs and everything in-between. - Included is a sheet large enough to cover your down tube, top tube, chain-stay, cable rub points and crank arms. Also works great for fork lowers, shock bodies, and more! Especially great for protecting carbon frames or decals. - It’s easy to cut and apply—simply trace and cut your desired pattern(s), clean your surface, and apply where necessary! - Want to boost re-sale value of you bike? EverClear is your ticket! By applying this stealthy 12µm protection to your frame when it’s new, you can preserve that new look without using any bulky and ugly frame protection. Then, when it’s time to sell, you can remove the EverClear, and you are left with a beautiful like-new bike that’s ready to get top dollar in re-sale. - Made in the USA

The Seltzer mount is designed to carry a standard bottle cage and two threaded CO2 cartridges, in a clean and compact way. - Holds one standard bottle cage - Accommodates two threaded CO2 cartridges, up to 25g - Can be installed directly to bottle cage mounts on frame - Bottle cage and cartridges sold separately