Accessories

Park Tool's Event Stand is a versatile, stable, multi-purpose storage rack built to hold up to twelve bikes by the nose of the saddle. Perfect for events, races, or sidewalk storage, the ES-1 disassembles and folds easily for compact storage. It includes two height-adjustable tripod uprights, two 47" (119cm) support tubes, and one connector sleeve. The ES-1 is approximately eight feet long but can be extended in length with the use of ES-2 Event Stand Add on Kits (sold separately). - The ES-1 adjusts from 94 to 120cm (37"-47") - Horizontal width (inside to inside): 2.23 meters (87")

Park Tool's Event Stand Add On Kit extends the length of the ES-1 Event Stand (sold separately) by eight feet. It includes one height-adjustable tripod upright, two 47” (119cm) support tubes, and one connector sleeve.

Park Tool's Fork Threading Set is designed for cutting new threads and for chasing existing threads on fork columns that are not chromed. The FTS-1's expandable cutting dies are made from the highest quality high-speed steel for precision cutting and long life. The unique thread guide system used with the FTS-1 is specially designed to allow the metal chips and shavings that result during use to fall completely through the guide, preventing damage to the fork threads and the tool. The FTS-1 includes: • Die handles • 1" x 24 tpi cutting die (Part #606) • 1" cutting guide (Part #610) Accessory dies and guides are also available separately: • 1-1/8" x 26 die (Part #607) • 1-1/8" guide (Part #611) • 1-1/4" x 26 die (Part #608) • 1-1/4" guide (Part #612) Die handles fit all three sizes of dies and guides.

- The HBP-1 is designed to quickly and accurately press bearings into a wide variety of cartridge bearing-type bicycle hubs. - Quick release design for fast tool installation and removal - Includes two bearing presses and precision machined aluminum pilots, bushings, and spacers - Works with more than 20 different cartridge bearing sizes and multiple axle configurations

Park Tool's 692 Left-Hand Bottom Bracket Tap is a 1.370" x 24 TPI replacement tap for the BTS-1 Bottom Bracket Tap Set. This tap is used on the drive side (right side) of the bike. This side of the bottom bracket uses a counter-clockwise or left-hand thread. Note: It is very important to have sharp and accurate cutting tools for effective tapping and thread-chasing. Using an excessively worn or damaged tap can cause permanent damage to the frame and/or bottom bracket.

"A full-featured bicycle workstand designed and built for the home mechanic. The PCS-10.3 includes Park Tool's tried and true cam-actuated micro-adjustable clamp design for quick one-handed entry and exit, as well as a quick-release height adjustment lever for easy, secure adjustment. Features 18"" (460 mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing. The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with tubular support braces, a locking support yoke, and upgraded internals for extra dependability. The PCS-10.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes. The PCS-10.3 features an integrated height-adjustable parts tray, as well as accessory ports for the Park Tool #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately), so your tools and small parts are always within reach. Quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion. The PCS-10.3 is the perfect way to upgrade your home shop—a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair. NOTE: The maximum weight capacity of the PCS-10.3 assumes the weight is centered below the clamp and between the legs.? - Cam-actuated micro-adjustable clamp fits 7/8"" to 3"" (22 mm–76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts - Narrow clamping jaws (2.7""/70 mm) fit into tight areas or on short seat posts - Rubber saddle pad allows bikes to be hung by the saddle for quick adjustment or storage - Durable, textured powder coat finish - Integrated height-adjustable parts tray - Height adjustment collar features accessory ports for compatibility with the #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately) - Maximum weight capacity*: 80 lbs. (36 kg) - Height adjustable from 39"" to 57"" (990 mm–1450 mm) using convenient quick-release lever - Base when open forms a triangle of 36"" x 36"" x 48"" (920 mm x 920 mm x 1210 mm) - Folds down to 45"" x 14.5"" (1140 mm x 370 mm) - Weight: 16 lbs. (7.2 kg)"

"The PCS-9.3 is a basic folding bicycle workstand designed and built for the home mechanic – a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair. Features 18"" (460 mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing. The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with a locking support yoke and upgraded internals for extra dependability. The PCS-9.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes.* The PCS-9.3 quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion. The PCS-9.3 is the perfect way to upgrade your home shop. NOTE: The maximum weight capacity of the PCS-9.3 assumes the weight is centered below the clamp and between the legs.? - Fully adjustable clamp fits 7/8"" to 3"" (22 mm–76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts - Narrow clamping jaws (2.7""/70 mm) fit into tight areas or on short seat posts - Durable textured powder coat finish - Maximum weight capacity: 80 lbs. (36 kg) - Height adjustable from 39"" to 57"" (990 mm–1450 mm) - Base when open forms a triangle of 36"" x 36"" x 48"" (920 mm x 920 mm x 1210 mm) - Folds down to 44"" x 14.5"" (1140 mm x 370 mm) - Weight: 16 lbs. (7.2 kg) - #2848A quick-release collar with accessory pods required for use of PTH-1 Paper Towel Holder or 106 Work Tray"

The PRS-26 incorporates proven features from our other Team Issue stands to produce a strong, lightweight repair stand that's at home on-the-go or in the race pits. The sturdy tripod leg design folds and unfolds quickly and easily, and provides stability on any surface. The clamp is height-adjustable from 97 to 147 cm (38" to 58"), and can be positioned over one leg or between two legs to accommodate any bike. Precisely constructed from anodized 6063 T6 lightweight aluminum and durable composites, the PRS-26 is our lightest full-featured repair stand, and folds compactly for storage or transport. The PRS-26 is equipped with the time-tested 100-25D Micro-Adjust Clamp, the same design featured on our shop repair stands. The 100-25D features narrow clamping jaws to fit into tight areas or on short seat posts, and clamps nearly any tube from 23 to 76 mm (7/8" to 3"), including aero tubes and dropper posts. The cam-actuated adjustment system allows for quick entry, adjustment and exit. - Maximum weight capacity*: 36 kg (80 lbs.) - Clamp capacity: round and aero tubes from 22 to 76 mm (7/8" to 3") wide - Jaw width: 70 mm (2.75") - Height adjustable from 97 to 147 cm (38" to 58") - Base when open forms a triangle of 126 x 126 x 126 cm (49.6" x 49.6" x 49.6") - Weight: 5.7 kg (12.6 lbs.) - The PRS-26 uses the 100-25D Micro-Adjust Clamp - Replaceable jaw covers (part #1960) *NOTE: The maximum weight capacity of the PRS-26 assumes the bike's center of gravity is positioned directly below the clamp.

Perfect for taking to races and rides, the Portable Workbench is a bench that folds for easy transport and storage. It features a large work surface with specially sized slots, holes, and recesses and for holding tools, shop towels, lubes, beverages, etc. The folding steel legs provide a solid base for a toolbox and supplies, too.

The 791 Reamer Set reamer is used on the PF30 frame shells. The reamer is sized at 45.94mm. The 791 Reamer Set must used with the HTR-1 Head Tube Reamer and Facer, a 750.2 Centering Cone and the 690-XL Facer. The 791 set also includes a pilot that allows a facing-only option of the PF30 frame shell.

Walk into the service area of any bike shop in the world, and odds are good you'll see a Park Tool Professional Wheel Truing Stand on the bench still the top choice of professional mechanics everywhere for over 40 years, and for good reason. With extra-tall uprights and wide calipers, the TS-2.3 is capable of accepting most wheels commonly found on road, mountain, BMX, and hybrid bicycles, including wheels with disc brakes, aero rims, and oversized MTB tires. Upright adjustment is controlled with an ergonomically-designed speed knob, which quickly adjusts the stand to accommodate any hub width in seconds. The sturdy uprights of the TS-2.3 feature integrated storage for the included thru-axle adapters, which allow for compatibility with thru-axle, quick release, and solid axle hubs without the use of additional parts or adapters. The TS-2.3 is constructed from durable powder-coated heavy-gauge steel and is manufactured, assembled, and calibrated in St. Paul, Minnesota. Strong, comfortable knobs and spring-loaded calipers and caliper arm ensure smooth, consistent operation, and the removable composite caliper tips protect painted rims and fragile materials. 100% adjustable and rebuildable for a lifetime of use. Wheel Capacity: - Maximum wheel size: Up to 29" + with or without tire - Maximum hub width: 200 mm (7.87") - Maximum rim width: 102 mm (4") - Hub compatibility: Accommodates quick release and solid axle hubs, also accommodates thru axle hubs using included TS-2TA.2 Thru Axle Adaptors Mounting Options: - Bolt to benchtop — mounting holes are 9.5 mm (3/8") in diameter and 200 mm (7.9") from center to center - Clamp in vise — base is 76 mm (3") deep - Install in TSB-2.2 Truing Stand Base

Park Tool offers premium-quality reamers for nearly any bicycle standard. The reamers below are designed to quickly, accurately, and precisely ream headtubes when used with Park's Head Tube Reamer (HTR), ensuring a perfect headset fit and prfoessional-quality bicycle build. Choose the correct reamer for your application using the following information: - 751.2: This reamer is sized to 30.1mm. This allows a 0.1mm interference fit when pressing the 30.2mm headset of the “Euro” one-inch standard. - 754.2: This reamer is sized to 33.9mm. The allows a 0.1mm interference fit when pressing the 34.0mm headset of the 1-1/8" standard. - 788: This reamer is sized to 43.95mm. It reams head tubes to accept “internal” headset cups with 44.05 - 44.10mm O.D. (1-1/8 ZS standard). It is used with Park Tool's 690-XL Facing Cutter and 750 Centering Cone. - 738: This reamer is sized to 52.1mm. It is used to ream head tubes using the 1-1/2" integrated headset standard. It is used with Park Tool's 690-XL Facing Cutter and 750.2 Centering Cone Adapter. - 789: This reamer is sized to 55.95mm. It is used to ream head tubes to accept “internal” headset cups with 56.00–56.10mm O.D. (1-1/2 ZS standard). It is used with Park Tool's 690-XXL Facing Cutter and #750 Centering Cone Adaptor. - 799: This reamer is sized to 47mm. It is used for cutting the lower head tube on frames using an IS47 bearing for a 1-1/4" integrated headset. It cuts a 45-degree bearing set shoulder.

Park Tool's 752 Reamer and Spacer Set allows reaming of bottom bracket frame shells in the BB30 standard. The reamer is sized at 41.94mm. It is used with the HTR-1 Head Tube Reamer and Facer and a 750.2 Centering Cone (each sold separately). The set includes a spacer to stop the reaming depth.

Park Tool's 130 Repair Stand Base is designed for the PRS-3, PRS-3OSLB, PRS-3 OS-1, PRS-3 OS-2 and the PRS-23 LB Repair Stands (each sold separately). • 22-1/2" x 22-1/2" x 7/16" (57cm x 57cm by 1.1cm) steel plate • Approximately 68 lbs (31k) • Black painted

Park Tool's Right Hand Bottom Bracket Tap is a replacement tap for their BTS-1 Bottom Bracket Tap Set (sold separately). This tap is used on the non-drive or left side of the bike, which uses a clockwise or "right hand threading." Two taps are required for use.

The SBK-1 is a professional level kit for installing and removing cartridge bearings in bicycle suspension pivots. A comprehensive set of 27 precision-machined hard-anodized guides enables compatibility with a wide range of bearing inner and outer diameters. Combined with our proven bearing press design, the SBK-1 quickly and easily pushes the old bearing out of the linkage and reinstalls the new bearing precisely and squarely. - Magnetic back plate for easy configuration and assembly - Organized in a convenient storage case Includes extractor cups/drifts for the following ODs: - 16mm - 17mm - 19mm - 20.6mm - 21mm - 22mm - 22.3mm - 24mm - 26mm - 28mm - 28.6mm - 30mm - 32mm - 35mm Includes extractor studs and pilots for bearings with the following IDs: - 8.5–9mm - 10mm - 12mm - 12.7mm - 15mm - 17mm - 20mm NOTE: For bearing extraction, the SBK-1 requires a minimum of 3mm of flat linkage structure outside the bearing to support the extractor cup/drift. For bearings without this flat structure, consider using the Park Tool SHX-1 Slide Hammer Bearing Extractor.

The SHX-1 Slide Hammer Extractor is a professional solution specifically designed for removing press fit cartridge bearings from bicycle components. Utilizing expanding collets, an extendable shaft, and a substantial (960g) slide hammer, the SHX-1 securely yet forcefully drives out cartridge bearings with targeted impact. The SHX-1 is compatible with cartridge bearings with inner diameters from 6 to 32 millimeters, covering most press fit applications found on bicycles including hubs, suspension linkages, and bottom brackets. - Set of 5 expanding collets covers most bicycle bearing IDs from 6mm to 32mm - Slide hammer shaft is extendable from 6.5" (165mm) to 13" (233mm) for additional force when needed - Organized in a convenient storage case

Tough, light, and loaded with features, that's Park's Team Issue Repair Stand. The 3-point leg system and adjustable height (up to 60 inches) creates a stable, ergonomic repair station for easy, efficient wrenching. And, Park's Professional Micro Adjust Clamp quickly clamps nearly any frame tube from 7/8 to 3 inches in diameter, including aero tubes. And the clamping force is fully adjustable for safety. Plus, the clamp has soft, durable rubber jaws that are narrow to fit on even short seatposts and tight areas on a bike. And, the clamp rotates 360 degrees for easy access to any part of the bike. Also, if you're in a hurry, there's a seat cradle for simply hanging your bike too. This great stand folds fast and small for easy transport and storage.

Updated with a smoother, more solid rotation system! Originally designed for professional Pro Tour mechanics. The PRS-22.2 firmly holds any bike without clamping the frame or seat post by supporting the bottom bracket then locking either the front or rear dropouts. Works with any style axle system, including quick release and all sizes of thru-axles without cumbersome adaptors. Ideal for cleaning and general repair work, the PRS-22.2 features a solid tripod base and folds compactly for storage or transport. - Precisely constructed of anodized 6063 T6 lightweight aluminum and durable composites (12.5lbs, 5.67kg) - Adjustable BB height of 30" to 45" / 76cm to 114cm - 360 degree horizontal rotation allows easy access to all sides of the bike - Customizable bottom bracket supports accommodate a wide variety of BB shells - Main beam is adjustable fore and aft to customize balance points - Adjustable collar features receivers for optional accessories (sold separately) 106 Work Tray and PHT-1 Paper Towel Holder - Easily transported in the BAG-20 (sold separately)

With lens tints optimized for cycling and numerous features that work to enhance durability and comfort while performing, Do Blade sunglasses protect optimum vision in all conditions. The lightweight, durable grilamid frame provides flexibility and the possibility to change lenses based on prevailing conditions. Hydrophilic rubber nosepieces ensure the glasses stay steady during strenuous sporting activities. Lens tints are designed to increase contrasts on the road surface, so you can more easily sport irregularities and react in time. Anti-fog and Ripel treatments help keep the lenses pristine, even in challenging conditions. - Grilamid construction - Rubber nosepiece and temples stay grippy even when wet - Interchangeable lenses from Carl Zeiss - Complete UV protection (UV400)

Durable polyester fabric make this pannier a long lasting touring companion. The waterproof roll closure ensures safe and waterproof storage of food and equipment. With its QL2.1 fixing it is quickly mounted and taken off the bike rack. A shoulder strap provides carrying comfort when taken off the rack. - Classical rear pannier (pair) with roll closure - Sides of PS 490 nylon material, front and back of PD 620 - QL2.1 system for racks up to 16 mm - 20 mm hook available as separate accessory (e.g. for e-bikes) - Including reduction pieces for tube diameters 8, 10 and 12 mm; with anti-scratch function reducing abrasions on rack - Top QL hooks and lower sliding hook adjustable without requiring any tools - Lower hook rail made of two-component "hard-soft" synthetic reduces abrasions on carrier - Including integrated inner pocket and shoulder strap - Can be used individually (e.g. for shopping, sports, picknick) - Can be combined with the ORTLIEB Rack-Pack size S or M - Highly reflective Scotchlite reflector - Easy to clean inside - Optional accessories: ORTLIEB carrying system, outer pockets (size S), mesh pocket, bottle cage, 20 mm QL2.1 hook, anti-theft device long - Note: In order to meet standard IP64 (6=dustproof, 4=protected against splash water coming from all directions) the closure must be rolled 3-4 times.

In keeping with its commitment to innovation, Ortlieb has just introduced another PVC-free line of products made of a polyurethane-coated polyester fabric. The base fabric of the products in the Free Line is coated with polyurethane in a manner that ensures lasting waterproof qualities. The result is a waterproof and durable canvas material that is as outstanding as the conventional Ortlieb canvas material when it comes to durability and service life. The PVC-free version of the proven Ortlieb Back-Roller was developed for cyclists and outdoor enthusiasts who would like to avoid PVC entirely. This rear pannier bag with a roll closure offers ultimate practicality for all of your bike tours and weekly grocery-shopping ventures, especially on account of its generous payload. Thanks to its waterproof exterior, easy-to-clean interior and shoulder-bag function, the Back-Roller Free is ideal for all who would like to use their bikes despite having things to carry. With the Quick-Lock2.1 system, the bags attach to any bike rack with a tube diameter of up to 16 mm. Larger hooks (e.g. for e-bikes) are available separately. - Classical rear pannier (pair) with roll closure - Made of PVC-free, PU-laminated polyester fabric - QL2.1 system for racks up to 16 mm - 20 mm hook available as separate accessory (e.g. for e-bikes) - Including reduction pieces for tube diameters 8, 10 and 12 mm; with anti-scratch function reducing abrasions on rack - Top QL hooks and lower sliding hook adjustable without requiring any tools - Lower hook rail made of two-component "hard-soft" synthetic reduces abrasions on carrier - Including integrated inner pocket and shoulder strap - Can be used individually (e.g. for shopping, sports, picnic) - Can be combined on the rack with Ortlieb Rack-Pack size 24L or 31L - Simultaneous use of Ortlieb Travel-Biker possible - Highly reflective Scotchlite reflector - Easy to clean inside

Made of durable polyester fabric and long known as an ideal pannier for extended tours in any kind of weather, the spacious Bike Packer Classic is now available with the QL2.1 rack mounting system. The advantage of this faithful companion at your rear wheel: greater transport comfort, stability and safety. - Panniers (pair) with classic lid closure for large packing volume - Sides of PS 490 nylon material, front and back of PD 620 - QL2.1 mounting system for racks with max. 16 mm tube diameter - 20 mm hook available as separate accessory (e.g. for E-bikes) - Reduction inserts for tube diameters 8, 10 und 12 mm with anti-scratch function preventing abrasion on the rack - Hooks adjustable without requiring tools - Lower hook rail made of two-component hard-soft synthetic with anti-scratch function protecting the rack - Including integrated inner pocket and shoulder strap - Due to its symmetrical form it is possible to use only one bag on left or right side - The dust flap - with easily operable pull cord - under the lid provides protection e.g. against water, dust and snow - The edge protector prevents contact with spokes and abrasion - Simultaneous use of Ortlieb Travel-Biker possible - Highly reflective 3M Scotchlite reflector - Easy to clean inside

The perfect pair of bags for any adventure: you'll be astonished at how much gear fits in the Ortlieb Bike-Packer Plus! The classic flap closure is easy to operate and provides a maximum of stowage on top. The waterproof, three dimensional front compartment offers additional space for many of the small items you may need to access quickly while en route. The durable, high-quality Cordura fabric provides optimal protection against water, dust and abrasion. Thanks to the proven QL2.1 system with self-closing hooks, attaching the Bike-Packer Plus to your bike rack and removing it again is a matter of seconds. All of these features allow you to devote your attention to your tour and the beautiful sights to see along the way, no matter what the weather! - Pannier pair with lid closure and large packing volume - PU-laminated Cordura - QL2.1 mounting system for racks with max. 16 mm tube diameter - 20 mm hook available as separate accessory (e.g. for E-bikes) - Reduction inserts for tube diameters 8, 10 und 12 mm with anti-scratch function preventing abrasion on the rack - Hooks adjustable without requiring tools - Lower hook rail made of two-component hard-soft synthetic with anti-scratch function protecting the rack - Including integrated inner pocket and shoulder strap - Due to its symmetrical form it is possible to use only one bag on left or right side - The dust flap - with easily operable pull cord - under the lid provides protection e.g. against water, dust and snow - The edge protector prevents contact with spokes and abrasion - Simultaneous use of Ortlieb Travel-Biker possible - Highly reflective 3M Scotchlite reflector - Easy to clean inside

The waterproof Sport-Packer Plus made of tough Cordura fabric is perfectly suitable as lowrider pannier in the front, "small" rear pannier or for children's bikes. The QL2.1 fixing offers quick and comfortable singlehanded mounting to the rack. - Universal panniers for low-rider racks in the front or rear racks - Abrasion resistant Cordura fabric - QL2.1 mounting system for racks with max. 16 mm tube diameter - 20 mm hook available as separate accessory (e.g. for E-bikes) - Reduction inserts for tube diameters 8, 10 or 12 mm with anti-scratch function preventing abrasion on the rack - Hooks adjustable without requiring tools - Lower hook rail made of two-component hard-soft synthetic with anti-scratch function protecting the rack - Including integrated inner pocket and shoulder strap - Ideal alternative to Sport-Rollers (can be loaded higher due to its lids) - Symmetrical shape allows use on right or left side - Ideal as "small" rear panniers for children's or youth bikes - Simultaneous use of Ortlieb Travel-Biker possible - Possibility to attach the Ortlieb carrying system - Highly reflective Scotchlite reflector - Easy to clean inside

High visibility is so important to us at Ortlieb because it is a matter of safety. Both the waterproof, polyurethane-coated Cordura fabric in neon yellow and the black fabric parts of this bag are densely interwoven with high-luminosity reflective yarn. This composition turns the entire bag into an eminently visible reflector when it is picked up in the headlights of passing cars. The waterproof Sport-Packer is perfectly suitable as lowrider pannier in the front, "small" rear pannier or for children's bikes. The QL2.1 fixing offers quick and comfortable singlehanded mounting to the rack. - Classical pannier (pair) with roll closure in bright reflective color - QL2.1 mounting system for racks with max. 16 mm tube diameter - Reduction inserts for tube diameters 8, 10 or 12 mm with anti-scratch function preventing abrasion on the rack - 20 mm hook available as separate accessory (e.g. for E-bikes) - PVC-free reflective fabric - Increased visibility when hit by headlights due to highly visible reflective fabric in neon yellow and black - Can be used individually or as pairs for the rear or front rack (low-rider) - Including integrated inner pocket and shoulder strap - Ideal for use on children's/youth bicycles - Highly reflective 3M Scotchlite reflector - Can be easily cleaned inside

NiteRider Lumina Max lights light up the night and are daylight visible with Cree LEDs and Max Boost mode. They're high-powered and feature a rugged design made with Dupont fiberglass-reinforced plastic body with integrated aluminum heatsinks. Max series lights feature NiteLink wireless connectivity with the Omega 300 taillight. - NiteLink Wireless Technology allows the rider to pair and simultaneously power on/off the headlight and Omega EVO 300 taillight wirelessly. (Taillight sold separately) - Multiple light modes including varying Steady and Safety Flashes - Handlebar mounting (Up to 35mm) with Quick Release Tab for easy light removal - CREE LEDs—the highest-performing LEDs on the market - Compatible with NiteLink Wireless Remote Switch (Sold separately) - Lumens: 2500 - Battery: Li-Ion - Recharge Type: USB

With a 2200 lumen output, you'll be sure to see every trail line, root, rut or rock with relative ease. The Pro 2200 Enduro spec includes an 8 cell battery for double the run times, when compared to the 2200 Race spec. The four steady light modes, two steady flashes and S.O.S. give you seven options for any adventure you decide upon. FEATURES - Lumen Output: 2200 - 7 Modes with Run Times: 3:00 – 50:00hrs - Charge Time: 5:00hrs - Weight: 702g - Battery: Li-Ion - 8 Step Fuel Gauge - Handlebar and Helmet Mountable - Water / Dust Resistant IP64 Rated RUN TIMES Low—12:00h at 500 Lumens Medium—6:00h at 800 Lumens High—3:00h at 2200 Lumens Flash—50:00h at 730 Lumens Beacon—50:00h at 730 Lumens S.O.S.—50:00h at 730 Lumens Race—50:00h at 250 Lumens

The Pro 2200 boasts one of the category's best power-to-weight ratios. With 2200 lumens of light output, using 3 CREE LEDs- set into a NiteRider custom reflector, guarantees to set the darkest bike trail ablaze. It features an accurate eight-step fuel gauge, keeping the rider informed of battery levels at all times. These attributes make the Pro 2200 the "go to" light among the world's top athletes and enthusiasts alike. - Compact and lightweight, perfect for race inspired riders - Custom 3 cone reflector producing brilliant trail illumination - 3 – class leading CREE LEDs at 6000k - Rugged design with Dupont Fiberglass reinforced nylon housings - Handlebar mount fits up to 35mm diameter bars - Helmet mountable - Lightweight 4 cell Li-Ion battery - Easily check battery power levels with the 8 step fuel gauge - FL 1 Standard IP64, dust and water-resistant - Convenient nylon storage pouch WARRANTY The Pro 2200 Race is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Headlamp - Li-Ion Battery - Helmet Mount - Handlebar Mount – Fits up to 35mm - 36" Extension Cable - AC Adapter - Nylon Storage Pouch

- Water based liquid with advanced surfactants resulting in excellent degreasing - Anti-corrosion agent added to solution to protect steel parts - Due to natural evaporation and splashes, expect to lose 8-10L per month from tank