Filter By:
- Parts & Accessories (33)
- Headlights (3)
- Taillights (9)
- Show More Brands
- Show Fewer Brands
Lighting
$7.49
$14.00
47% Off
Giant's Numen TL1 5 LED Taillight boasts 5 bright LEDs so you get noticed out on the road. If that wasn't enough, you have 4 modes: steady, flashing, patrol, and random modes for high visibility in traffic. And it runs for up to 180 hours. This great water-resistant light also sports 2 mounting options.
$7.99
-Mounts easily to front racks with threaded M5 mounts
-Allows for unobstructed light positioning
-22.2mm clamping diameter
$7.99
The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge.
System Compatibility
- Sentinel
- Solas
- Sabre
- CherryBomb
- TL 5.0 SL
Not compatible with omega 300 and sentry aero 260 tail lights.
$9.99
All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm.
SYSTEM COMPATIBILITY
- Lumina Series
- MiNewt Cordless Series
- Mako Series
WARRANTY
- This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)
$9.99
Make sure you have excellent rear visibility at night with the Blinky 3. This sweet taillight aims 3 bright LEDs directionally to provide visibility from up to a mile away. Its soft-touch power switch accesses flashing or steady modes for up to 100 hours of run time on the 2 AAA batteries (included). And, it includes seatpost and seatstay mounts.
$9.99
If you're looking to mount your Lumina and Mako series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment.
System Compatibility
- Lumina Series
- Mako Series
$2.99
Replacement rubber end plug for the Hecto Drive, Micro Drive or Mini Drive lights.
$2.99
Replacement rubber end plug for the KTV Front, KTV Rear and KTV Pro Rear lights.
$9.95
Be seen with CatEye's Omni 3 Taillight, which uses Omni Directional Technology for 360 degrees of visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 200 hours. Plus, CatEye's tool-free mount makes installation a breeze.
$9.99
If you're looking to mount your NiteRider PRO series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment.
SYSTEM COMPATIBILITY
- PRO Series
Not compatible with Lumina Pro lighting systems
$9.99
The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended.
System Compatibility:
- Lumina Series
- Mako Series
- MiNewt Cordless Series
$8.39
• 2 bright Nichia LEDs
• Uses 2 CR 2032 lithium batteries (included)
• 100 hour run time
• 3 modes: 2 flashing and 1 steady
• Water-resistant silicone body
$8.39
Put it on your seatpost, put it on your seatstay, put it anywhere—Sunlite's Griplite goes everywhere. This powerful little light boasts two LEDs and runs for a whopping 100 hours! It has steady and two flashing modes, and is housed in a water-resistant body.
$8.39
• 2 bright Red LEDs
• Includes 2 (CR 2032) lithium batteries
• 100 hour run time
• 3 mode (2 flashing modes & steady mode)
• Water resistant silicone body
$9.99
Mount the Nip light to an e-Bike that has the specialty Pro Max stem for accessories.
$2.99
Replacement rubber end plug for the Strip Drive Front, Strip Drive Rear or Strip Drive Pro Rear lights
- 8 lumen, single LED safety light
- 2 modes - solid and flashing
- Up to 110 hour run time with 2 CR2032 batteries (included)
- Multi-fit rubber strap attachment
$5.00
Mounting bracket for MSW front White Bat Headlight.
- Includes 1 front mounting bracket
$7.39
Others out on the roads and paths will see you when Sunlite's TL-L340 Taillight is on your bike. It sports 3 bright LEDs, steady and flashing modes, and a long run time.
$9.49
Sunlite's HL-K100 Headlight is a great light at a great price. It sports a super-bright Krypton bulb housed in a tough, water-resistant body so it's perfect for commuting year round. A no-tools-required quick-release handlebar mount is included, too.
$5.99
- Quick Strap mounts, adjusts or removes in seconds without tools
- Fits 25.4-35mm handlebars
- Compatible with Blazes, Beamers, 1200 and Super Spot
$5.99
Compatible with Shiner and Shiner Back lights
- Rubber pad with loop straps to quickly mount and remove light for recharging
- 50mm bolt spacing to fit most rear racks
$2.95
Flexible Versatite™ mount for Dash, Zot, Dart, Hotrod, Hotshot Micro 2W, Hotshot Pro 200 (flexible mount version; not for Hotshot Pro 200C) systems. Compatible with most handlebars, seat posts, and seat stays including aero styles.
$5.00
- Mounts Beamer and Blaze 1/2W lights to a helmet
- Compatible with Beamer 1, Beamer 3, Beamer 5, Blaze 1/2W and Blaze 2W Micro, Blaze 140 SL, Blaze 180 USB
- Increased weight and length of Blaze 300, 500, and 650 USB lights may cause awkward mounting on helmet
$9.99
The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory.
System Compatibility
- Sentinel
- Solas
- Sabre
- CherryBomb
- TL 5.0 SL
$9.95
Mount your Cygolite bicycle headlight to a variety of GoPro compatible interfaces and third-party mounting options that are compatible with the GoPro interface.
- Compatible with Ranger, Expilion, Metro, and Streak series
- Includes adapter piece only
$4.99
- Attaches to rear racks
- Compatible with: Blinky 3,5,7 and Superflash
- 25mm between each of the top horizontal holes (center to center)
- Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack
$9.99
This mount is designed to securely attach your Light and Motion Vis 180 Micro taillight to your bicycle.
Page 1 of 2
Next page