Cables

Jagwire's Sealed Shift End Caps are the important housing ferrules placed on the end of housing sections to optimize your shifting. They are available in 2 types to fit most housings and they feature small rubber O-rings to help prevent moisture and grit entering the housing and fouling your shifting. These ferrules are best used with derailleur cable and housing.

Jagwire's Sport Inline Adjusters are installed on your shift cable housing sections so that you can fine-tune the shift cable tension by hand (without tools). They're great for keeping your shifting dialed in. They're precision made of lightweight aluminum and nylon for easy use and durability. To install them, remove the cables and housing sections, cut the top housing sections in two and rejoin the sections with the Inline Adjusters in the middle.

Jagwire's 5mm Anchor Bolt fits certain models and types of brakes and is used to secure the cable in place after adjusting it. It is made of plated metal for strength and durability. You get a pack of 25.

Jagwire Sport Shift XL cable kits are perfect for bikes that need extra-long cables and housing. - Sport Slick Stainless inner cables resist corrosion and are die-drawn to reduce surface friction - Compressionless LEX-SL housing uses Slick-Lube liners to protect the cables and ensure consistent performance - Sealed end caps help keep contaminants out of the housing - Anti-Kink End Caps prevent damage when bicycle is folded - The single-ended SRAM/Shimano compatible cables end are weld-cut for easy installation

- High-performance compressionless outer casing designed for precise and effortless shifting - A fully lubricated inner housing liner reduces friction and enhances lever feel - Stainless steel low friction inner cable - Recommended for 10-speed drivetrains - 10-speed or less shifting system recommended - Compatible with Shimano® and SRAM® shifting systems Includes: 2 x Sealed End Cap, Alloy/Black 8 x Open End Cap, Alloy/Black 6 x Cable Oring, Translucent (2 sets = 6pcs) 2 x Frame Protector, Mini Black 2 x Cable Tip, 1.2mm, Alloy/Silver

Basics brake cables provide value on a budget. - Double ended for compatibility with SRAM/Shimano road and mountain brakes - Pre-stretched - Cable Head: Shimano/SRAM Road, Shimano/SRAM Mountain - Color: Silver - Diameter: 1.6mm - Length: 2795mm

- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Upper - Length: 11 - 12.5" - Diameter: 1.5mm

Replacement cables and housing for getting your front and rear brakes back up to snuff. Includes; - 1.5mm coated cables (1 x 1350mm, 1 x 2350mm) - 5mm Kevlar-reinforced compression-free housing - Ferrules, end caps, frame protectors

- Brake casing has internal lining and external plastic coating - Length: 30m

- For either front or rear shifter - Road & MTB compatible - 1.1 polished stainless steel cable

Precision-machined 5mm ID silver aluminum cable ferrules for improved braking performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most brake cables. - Inside diameter: 5mm - Outside diameter: 5.75mm - Overall length: 12.7mm - Material: aluminum - Bottle of 50pcs

Jagwire Elite Link housing is the ultimate combination of durability and attention-grabbing looks. Available in six eye-catching colors, they're designed to improve any bike's performance and appearance. 2x Elite Link Shift Kits are spec'd for use on road or mountain bikes that use both a front and rear derailleur. The housing uses a series of aluminum links to provide a compressionless system for precise shifting performance. But unlike typical compressionless housing, its flexibility allows for tight bends without kinking. It's also lighter than traditional linear strand shift housing while being more durable. Combine these benefits with Elite, ultra-slick polished cables and Slick-Lube liners, and you've got the best of performance and style. - Precise, compressionless shifting performance combined with extreme flexibility - Each kit comes with links pre-installed on housing segments making setup quick and simple - Ultra-slick polished inner cables minimize system friction - Durable aluminum housing won't kink or rust and is 20% lighter than typical shift housing - Includes enough housing and end caps for a bike with both a front and rear derailleur, with split (non-continuous) cable housing - Bikes with continuous housing and/or extra-large frames may need additional links and/or liners; service parts are available separately

Ditch the zip ties and clean up the look of your cables with Origin-8's Clamp-on Cable Stop. Available in a variety of diameters for different sized round frame tubes, the cable stop bolts on and provides a channel to run rear brake or derailleur housing to hold it securely in place. It's made of lightweight CNC'd aluminum.

- Nano-polished ultra slick extruded cables are non-coated for ultimate smoothness and durability - Kevlar reinforced compressionless linear strand housing with slick lube liner improves lever feel - Lightweight alloy end caps and cable tips - Compatible with Shimano/SRAM road and MTB brake levers Contents: - 1x - 1.5mm x 1350mm cable - 1x - 1.5mm x 2350mm cable - 3m - Compression-less 5mm housing - 2x - EZ-bend housing segments - 6x - Black alloy end caps - 2x - Black alloy end caps for small frame fittings - 2x - Black alloy cable tips - 2x - Black rubber cable donuts - 2x - Black rotating hooks

- Nano-polished ultra slick extruded cables are non-coated for ultimate smoothness and durability - Compressionless linear strand housing with slick lube liner for reduced friction - Lightweight sealed alloy end caps and alloy cable tips - Compatible with Shimano/SRAM road and MTB shifters Contents: - 1x - 1.1mm x 1500mm cable - 1x - 1.1mm x 2300mm cable - 2.7m - Compression-less 4mm housing - 8x - Black sealed alloy end caps - 2x - Black dirt guard alloy end caps w/ rubber boots - 2x - Black alloy cable tips - 2x - Black rubber cable donuts - 2x - Black rotating hooks

Frame-mounted barrel adjusters allow cable tension to be easily fine tuned. - Adjuster threading is M5 standard: 5mm OD, 0.8mm thread pitch - Bag of 10

- 4mm compressionless housing - Low friction polymer liner - Housing Length: 200m

- MTB or Road - 1.5 x 2667mm - Galvanized

- Rubber - Color: Black

- Use: S.I.S. - Length: 30mm

- Multi-strand construction - Length: 25 feet - Size: 5mm

- Fits cantilever brakes - Sold individually

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic hose (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to optimize braking performance and durability. This adapter kit contains all the components required for Hayes brakes and includes enough hardware for one bicycle.

SRAM's Inline Barrel Adjusters are placed on your brake cables near the handlebars so that you can turn the adjusters to fine-tune your braking. They feature durable and light aluminum/composite construction with rubber covers for easy operation.

- Nano-polished ultra slick extruded cable is non-coated for ultimate smoothness and durability - Compatible with Shimano/SRAM road and MTB shifters - Pre-stretched for more responsive braking - 1.1mm x 2300mm

SRAM's Line/Housing Frame Protectors are rubber covers that simply press onto your cable housings and or hydraulic lines to prevent the housings from hitting the frame and rattling or damaging the finish. There are 4 protectors in each package.

Stainless steel cables are extruded to provide a smooth, low-friction surface.

- Noodle/Boot completely seal brake cable, upgrades most linear brakes

Aluminum, Lightweight, Lubricated An alternative to traditional compressionless housing, this system is made of nesting alloy pieces that protect the liner. Although this housing is typically more expensive, it has several advantages including increased flexibility, reduced weight and increased durability. Both shift and brake housings use identical Slick-Lube liners and interconnecting alloy pieces. - Slick-Lube liners reduce friction and protect against corrosion - Includes four 1600mm liners

This aluminum link housing is the ultimate combination of durability and attention grabbing looks. It's designed to enhance your performance and appearance. So, why is it better than traditional housing? It's compressionless, which means better braking performance with enhanced modulation. But its flexibility allows for tight bends without kinking. It's also much lighter than traditional coiled steel housing while being more durable. Combine these benefits with Jagwire's Elite, ultra-slick polished cables and Slick-Lube liners that dramatically reduce friction and you've got the best of performance and style. - Compressionless link housing gives crisp brake lever feel with extreme flexibility - Each kit comes with links pre-installed on housing segments making setup quick and simple - 50% lighter than traditional coiled steel brake housings; 30% lighter than Kevlar brake housings - Durable, ultra-slick polished inner cables minimize system friction - Aluminum housing won't kink or rust. - 20th Anniversary Limited Edition Black kit (RCK705) has black link segments; the kit includes 6 additional accent links of each color including gold, silver, red, and blue